Is it the fob, or the battery?
Before replacing anything, it helps to know what's actually wrong. A fob is really two things in one case: a remote that locks and unlocks the doors, and, in most cases, a transponder chip or smart key that lets the engine start. They can fail separately.
| Symptom | Likely cause |
|---|---|
| Buttons work only up close | Weak battery |
| Buttons stopped working, car still starts | Dead battery or lost remote programming |
| "Key not detected" on a push-to-start car | Weak battery or a failing smart key |
| Fob cracked or buttons worn through | Shell can sometimes be replaced, otherwise a new fob |
| Fob went through the washer | Often damaged electronics, usually a new fob |
Cold New Hampshire mornings are hard on fob batteries, so a fob that acts up in December often just needs a fresh battery. We'll test it before suggesting anything else.
Fobs we program
- Remote head keys with lock, unlock and trunk buttons
- Flip keys with a folding blade
- Proximity smart keys for push-button start
- Separate keyless entry remotes
- Emergency key blades hidden inside smart fobs
How programming works
Every vehicle stores a list of the keys and remotes it will accept. Programming adds a new fob to that list. Some older vehicles can be programmed with a sequence of key turns and button presses. Most modern vehicles need a programming tool connected to the diagnostic port under the dashboard. We carry that equipment and do it on site, then test every function: locking, unlocking, trunk release, remote start where equipped, and starting the engine.
Adding a second fob
Many cars are sold with two fobs, and many used cars arrive with only one. If you have a single fob, adding a second is the simplest and least expensive moment to do it. Once the last fob is lost, replacing it becomes a much bigger job. See spare car keys.
Common brands
We program fobs for Toyota, Honda, Nissan, Ford, Chevrolet, GMC, Subaru, Hyundai, Kia, Jeep, Ram, Dodge, Mazda, Volkswagen, Lexus, Acura and many others.
Replacing a fob battery yourself
Before you call, it's worth trying a fresh battery. Most fobs open with a small slot along the seam; a coin or flat screwdriver twists the case apart. Note which way the old battery faces, swap in the new one, and snap the case back together. Test the buttons near the car.
If the fob still doesn't work, or the car won't detect a push-to-start key, the fob may need reprogramming or replacement. That's when we come in.
When a used fob is a gamble
Used and aftermarket fobs sold online can be a bargain, but many have already been locked to another vehicle and can't be programmed again. Others use a different frequency than your car. If you're considering one, send us the part number or FCC ID printed on the back first. If it won't work, we'll tell you before you buy, and we can supply a fob that's known to program to your vehicle.
Common questions
Can I buy a fob online and have you program it?
Sometimes. Many online fobs are the wrong frequency or have been locked to another vehicle. If you already have one, tell us the part number and we'll check whether it can be programmed.
Will programming a new fob erase my old ones?
On some vehicles, programming clears the list and every fob has to be programmed again. Bring all your fobs and we'll add them together.
What battery does my fob use?
Most use a coin cell, often a CR2032 or CR2025. The number is printed on the battery when you open the case.

